The first time I saw it on the shelves, I thought to myself, “waterproof decking tape? Does that sound dangerous?” It is. However, before we dive into that, let’s look at how a basic deck can be made waterproof.
There are two types of decking tape: ones that stick to the wood surface, and those that require a special glue to stick to the surface. The latter type is more difficult to work with and also more expensive. To make it easier for the DIYer (me), there are two types of vinyl decking tapes available on the market today. Standard and in-screw tapes are most well-known.
Waterproof decking tape is, as the name implies, a tape that can be used to seal your deck. The tape’s adhesive connects water-resistant vinyl to the decking surface, thereby preventing moisture from seeping in. This is especially beneficial for decks made from plastic since regular plastic doesn’t have the required properties to withstand moisture. For decks made from wood, however, the tape will not perform because the necessary water resistance isn’t present.
Waterproof decking tape has to be applied to both surfaces, just as like any other tape. First, place the tape on your wood deck. Then, attach the tape to your lumber. When you are ready cut the tape, however you should ensure that the tape is securely attached to the the decking surface. You can do this by pressing down on both surfaces using your hands. If you do it correctly you will not notice that the tape is there. Do not try to tear the tape if it’s damaged.
The waterproof decking tape has a specific application method that should be applied with care. It is not recommended to cut with a rough blade the tape because the edges of the tape may be ripped by the force used when the tape is cut. Instead employ an instrument or knife to cut the tape. You can also use the blade of a screwdriver or a small electric device to scrape off excess tape before cutting. If you handle the tape with care you can rest assured that no damage will take place when you apply it to the decking surface.
This tape is simple to apply. It is all you need to do is wet the tape with water and then rub it onto the surface of the decking material. It is not recommended to rub the tape if it is damp. This can cause the tape to be damaged by the presence of water or moisture.
After the tape has been applied to the decking material, you should leave it alone and allow it to dry. You should not attempt to loosen the tape or remove any excess tape from the surface using any tools. The tape should remain in place unless you attempt to remove it. This is actually a more appropriate time to use a knife to remove any leftover dirt or debris from the application process.
Waterproof decking tape can be found in a variety of hardware stores and is quite affordable. It is worth looking at the cost of maintaining a decking surface that is waterproof, rather than replacing it every year due cracks. By following these simple steps, you can protect the surface of your deck surface from damage due to the elements.
know more about https://waltherstrong.com/product/deck-tape/ here.